BONDS by IQOS first steps.

A handy introduction to your new device.

How to use BONDS by IQOS for the first time.

Step 1 icon represented by the number 1 inside a turquoise circle.

Unbox your device.

    - Carefully remove the BONDS by IQOS device from the packaging. You’ll also find the User Guide and Safety Warnings and Instructions.
    - Ensure you have a compatible charging cable, AC power adaptor, and ROUNDHEAT sticks on hand. These are sold separately.
Step 2 icon represented by the number 2 inside a turquoise circle.

Charge the device.

    - Plug the device into a wall socket to charge, using compatible charging accessories.
    - A full charge takes about 120 minutes.
    - Once charged, insert the ROUNDHEAT stick.
Step 3 icon represented by the number 3 inside a turquoise circle.

Start the experience.

    - Press the button for 4 seconds to start pre-heating. The device will vibrate and lights will pulse.
    - Give about 25 seconds for the device to pre-heat.
    - The device is ready for use.
Note: ROUNDHEAT sticks are not included in the device box. You need to buy ROUNDHEAT sticks separately.

Quick guide to get familiar with your BONDS by IQOS.

How to charge the device
How to use the BLENDS sticks
How to turn on the device
Device patterns & features
How to optimize experiences

How to charge BONDS by IQOS.

It takes about 120 minutes to fully charge your BONDS by IQOS. For optimal charging, avoid charging with a laptop or power bank and ensure the USB ports are clean.
To charge your device:
1. Connect the device to a wall socket using a compatible charging cable and AC power adaptor. At any given time, there's only 1 light flashing white. Any other lights will be solid.
2. Leave it to charge. At 100%, all white lights stay on for 3 seconds and then slowly fade out.
Note: The blinking light indicates the level of charge. As the charge level increases, more lights will blink. ​
Close-up of the battery indicator on a red BONDS by IQOS device showing battery charge levels.

How to use ROUNDHEAT sticks.

Only ROUNDHEAT sticks are compatible with your BONDS by IQOS.
How to use ROUNDHEAT sticks:​
1. Insert the stick up to the line. The filter must point outward.
2. Press the button for 4 seconds to start pre-heating.
3. Αfter the second vibration and fixed light(s), the device is ready to use.
Front view of a red BONDS by IQOS device showing the power button and indicator light.

How to turn on the device.

Press the button for 4 seconds to turn on your BONDS by IQOS. The lights will ramp up, then display the battery status.​
Note:
- Press the button for 4 seconds to turn off the device.​
- Charging the device will automatically turn on the device.
Close-up of a red BONDS by IQOS device with illuminated battery indicator lights.

BONDS by IQOS patterns and features.

- Pre-heating: BONDS by IQOS pre-heats for 25 seconds. After the 2nd vibration, the device is ready to use.
- Cool down mode: After 3 consecutive experiences, the device will need about 4 minutes to cool down before starting another experience.​ While cooling, lights ramp up and down.
- Experience ending: To signal the last 30 seconds, BONDS by IQOS will vibrate once. The experience ends as soon as the lights turn off.
Close-up of a red BONDS by IQOS device showing a yellow indicator light.

How to optimize experiences.

Your BONDS by IQOS is designed to provide up to 28 uses from a fully charged device.
Each experience lasts up to 5 minutes.

To get the most out of your experiences: ​
- Give about 25 seconds for BONDS by IQOS to pre-heat.
- The device is ready for use after the second vibration. ​
- Pause between puffs so it can heat the tobacco properly.​
- Avoid moving the stick during an experience.
Red BONDS by IQOS device with illuminated battery indicator lights displaying available usage capacity.
Watch and learn.
Our video tutorials demonstrate your BONDS by IQOS features. You’ll see how your BONDS by IQOS works for intuitive use and get to know what it’s telling you at a glance.
BONDS by IQOS user document.
Our BONDS by IQOS user documents are designed to help you understand and properly use your specific model.
You’ll learn about:
    - Component names and functions.
    - Optimal storage and usage.
    - Safety warnings and instructions.
    - Warranty coverage.
Download BONDS by IQOS user document
Red BONDS by IQOS device displayed on a wooden surface.
FAQs
No, before using your BONDS by IQOS for the first time, it’s important to fully charge the device.
To charge your device:
1. Plug the device into a wall socket using a compatible AC power adaptor and charging cable.
2. Leave it to charge for 120 minutes, until all 4 LEDs are solid white.
Your BONDS by IQOS device is ready to be used for the first time when all 4 LEDs are solid white (100% charged).
To check the battery charge level, briefly press the power button.

For optimal charging:
1. Plug the device into a wall socket using a compatible AC power adaptor and charging cable.
2. Leave it to charge for about 130 minutes.
Your BONDS by IQOS device features a cool down mode, which is automatically triggered after 3 consecutive uses.

During cool down:
- The device takes 4 minutes to cool down.
- You won’t be able to start another experience until the 4-minute cool down period ends.
- Lights pulse up and down.
While it’s not strictly necessary to register your BONDS by IQOS device to start enjoying experiences, it is highly recommended because:
- Registered devices can be quickly identified and serviced, making the troubleshooting process faster and more efficient.
- It’s easy to check if your device is covered under warranty—crucial for replacements or repairs.
- You gain more personalized steps when using our online troubleshooting tool.
These products are not risk-free and provide nicotine, which is addictive. Only for use by adults.