Use of IQOS 2.4 Plus

Home FAQ Use of IQOS 2.4 Plus
Home FAQ Use of IQOS 2.4 Plus
IQOS 2.4Plus has the following new features:
• IQOS Holder: faster charging (up to 35% faster)
• IQOS Holder vibration
• More robust Pocket Charger (improved latch)
• Brighter, white lights on IQOS Holder display
• Auto cleaning cycle replaces manual cleaning

IQOS Holder vibration:
• Vibration begins and a light pulses when you press and hold the Heating Button. This indicates the beginning of the experience (that you can enjoy a tobacco stick for about 6 minutes or 14 puffs whichever comes first).
• Vibration and blinking begin when there are 30 seconds or 2 puffs left. This indicates that the IQOS Holder will switch off automatically.
Auto cleaning:
• Auto cleaning is automatically triggered every 20 charges, after the IQOS Holder has finished its charging process.
• During auto cleaning, the user will observe a longer charging process of the Holder (recharge – cleaning – recharge) and constant pulsing white lights.
You can easily check the charge level by following these simple steps:

1. Press for 1 second the ON/OFF button
2. The LEDs will turn on and indicate the level of charge:
- 1 LED = low charge level
- 4 LEDs = device is fully charged
It takes approximately 90 minutes to fully charge the IQOS 2.4Plus Pocket Charger from an electrical outlet. Only charge IQOS 2.4Plus device using the supplied AC Power Adaptor and USB cable.
The IQOS device does not require a full charge to work. If the IQOS 2.4Plus Pocket Charger is fully charged you may use the holder for up to 20 times.
You can easily do a reset of your IQOS 2.4Plus device by simultaneously pressing and then releasing the Bluetooth and Power Buttons until all lights briefly blink.
Holder vibrations are activated in the following situations:
- At the start of heating (once you press the Holder Button to start)
- When the experience is nearly complete (30 seconds prior the end)
IQOS 2.4Plus is designed to work in a wide range of temperatures, but HEETS tobacco stick tastes best when the device is used between 10℃ and 40℃.